- Home
- Equipment
Refine by
Electro Sensors Environmental Equipment & Supplies
16 equipment items found
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The #380 Encoder is a standard industrial grade encoder available with single channel or quadrature output. The #470 Encoder has a size 25 heavy-duty industrial housing with rugged sealed ball bearings and an anti-backlash flexible shaft coupling to isolate the internal high precision encoder from both axial and radial shaft loading. The #470 Encoder supplies a quadrature output with an index ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
For years a large percentage of the expense of a hazard monitoring system has been the labor and material costs associated with the installation of conduit and wiring. Our field-proven HazardPRO™ Wireless Hazard Monitoring System was designed from the ground-up to provide turnkey, reliable, and consistent protection for your most valuable assets. Consistent operation is ensured with ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The AP1000 Digital Tachometer combines accuracy and reliability in a rugged, compact housing. The AP1000 is completely field programmable, and offers simple set up and calibration for use in a wide variety of monitoring and process control applications. The AP1000 can take a variety of pulse inputs. The meter translates the input pulses to display RPM, or any specified user unit such as ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
907 XP sensors are used in applications requiring hazardous location ratings, or in applications where the sensor may be subject to abuse. It has a 1-inch NPT conduit opening for wiring, terminal strip for wiring, and is provided with a mounting bracket and 10 ft of cable. The quadrature (bidirectional) option has two sensors and is designed for applications requiring both speed and direction ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
Pulser Discs are a necessary part of a speed monitoring system. Discs provide magnetic sensor shaft targets and are compatible with Electro-Sensors' shaft speed sensors. The large gap allows maximum flexibility in mounting the sensor, making them ideal for environments where there is vibration, dirt, dust, grease, or water. The number of pulses per revolution generated by the Pulser Disc and ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
Standard Pulser Wraps have magnets mounted on the outside circumference that serve as targets for Hall Effect and Magnetoresistive sensors that switch when exposed to magnetic fields. All wraps are custom machined to the diameter of the monitored shaft and are split into halves. The halves are secured around the shaft with recessed Allen head socket screws (supplied). Standard pulser wraps ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The shaft RPM sensor is typically mounted to the tail shaft of the machine being monitored. The sensor is mounted in the EZ 1 Mag mounting bracket assembly, which attaches to the tail shaft with a 1/2"-13 UNC tapped ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The SA420 interfaces with a wide variety of sensors and provides an analog signal directly proportional to the speed of a monitored shaft. The voltage outputs can be sent to a chart recorder, digital display, PLC, loop controller, drive speed controller, or any other control or monitoring device. The wide voltage range and wave shape flexibility of the SA420 input circuitry allow it to translate ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The Electro-Sentry 1 Controller is part of a hazard monitoring system commonly used on grain elevator legs or conveyors to monitor critical points for shaft slowdown, bearing temperature, and belt alignment as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage, and process downtime. ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
TT420-LT temperature probes and fittings are optimized for shaft bearing (TT420Z-LT), belt rub-block (TT420S-LT) and other temperature measurement applications. All models have integral liquid/dust-tight conduit fittings allowing complete sensor and cable segregation and ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The SG1000A slide gate monitor is a complete monitoring system housed in a compact and rugged explosion proof enclosure. It provides independent, accurate feedback of slide gate position to a controller (PLC) or Electro-Sensors' optional remote ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
TT420 temperature sensors are used to monitor temperature on a wide range of industrial machinery including liquid tanks, piping, conveyors, bucket elevators, motors, gearboxes, pumps, turbines, fans, curing ovens, centrifuges, agitators, hammermills, and ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The M100T and M5000T are compact, self-contained shaft rotation monitoring speed switches ideal for detecting unwanted slowdown or stoppage of process equipment. They have a terminal block inside the housing for easy wiring connection, calibration, and installation. The M100T has a relay setpoint range of between 5 rpm and 100 rpm. The M5000T has a relay setpoint range of between 100 rpm and ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The Electro-Sensors FB420 2.0 speed sensor provides a 4-20 mA signal directly proportional to the rotational speed of a monitored shaft and has a 4 digit LCD display capable of displaying from 0.000 to 9,999 rpm or from 4 to 20 mA, the display is also used for calibration and trouble-shooting. The sensor has one relay that can be programmed for failsafe over-speed alarm or failsafe under-speed ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
Model 906 sensors are water resistant and suitable for industrial applications, including environments where dirt, dust, grease, or moisture are present. The 906 standard sensor has a threaded aluminum body, and is supplied with a mounting bracket and 10 ft of cable. The quadrature (bidirectional) option has two sensors and is designed for applications requiring both speed and direction ...
Manufactured by:Electro-Sensors, Inc. based inMinnetonka, MINNESOTA (USA)
The Electro-Sentry 16 is a hazard monitoring system commonly used on grain elevator legs or conveyors to monitor critical points for bearing temperature and belt alignment as part of a predictive maintenance program to protect against catastrophic breakdowns and machinery failure resulting in product waste, machinery damage, and process downtime. All Electro-Sentry 16 sensors provide a standard ...